Matters needing attention when checking hydraulic press

Regarding a hydraulic machine, the normal use of the equipment, efficient production and processing, and daily maintenance are necessary! Let’s talk about the daily inspection and repair process of the equipment:

  • 1. Inspection and adjustment of the forging part of the Hydraulic Press During the pressure test, we can use a relatively high pressure to check the stroke of the piston. There should be no leakage in the oil circuit. After the pressure is removed, the pressure gauge will return to 0. The parts are not damaged at this time.
  • 2. Inspect the input equipment. Inspect the conveyor chain one by one. If there is serious wear, deformation, etc., we need to replace it.
  • 3. The overall inspection of the exterior of the hydraulic machine should thoroughly clean the exterior of the machine. Check whether the screws are loose, whether the parts are safe, whether there are cracks or deformations.
  • 4. Inspection of gathering and dispersing equipment The inspection of gathering and dispersing device should be carried out during work. Look at the wear condition of the wave-shaped teeth. To
  • 5. Inspection of trial work When the machine tool rolls over, we need to see if there is any air leakage, we also need to see if there is any abnormal vibration of the machine, and we need to lubricate it. The length of the safety signs on the fuselage cannot be less than 30cm.

Please keep the source and address of this article for reprinting:Matters needing attention when checking hydraulic press

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machine Wiki,Thanks

Related Posts